Please login or register.

Login with username, password and session length
Advanced search  


We changed servers, which is good, and lost all passwords, which is bad. See above.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - summer scheifer

Pages: [1] 2
Tech- - STEERING WHEELS AND SUSPENSION / Tire Size on 57 lancer
« on: August 22, 2012, 05:09:51 PM »
i want to try using Goodyear Car Tires is there any good reviews about this one? anyone could help me on this? and how much does it cost me? dont have any idea. advance thanks for any response mate!

Tech- - FUEL / Gas tank install
« on: July 24, 2012, 11:02:27 PM »
i really look for gas tanks for cars installation. thanks for having this on the forum its a big help. since i dont know how to install one.

General BS and Laughs / Saturday car porn
« on: July 17, 2012, 06:27:43 PM »
thats all pretty. ive been looking for online autoparts for ford until i saw those. i was wishing to saw them all personally.

General BS and Laughs / Chevy Malignum?
« on: May 01, 2012, 05:31:50 PM »
ive been looking for chevy malignum but i was thinking for the price of it. and a chevy parts for my old one. i was just thinking guys if you could help me on this? thanks a lot.

Tech- - Engine / Spin-on oil filter retrofit?
« on: April 19, 2012, 10:03:10 PM »

57 Plymouth 301 v8...changed oil and it took me a 1/2 hour to get the new oil filters/canister back up in there properly...The biggest problem was making sure the top (large) gasket was in it's seat properly...What a pain in the backside? For the next oil change I want to have a spin-on oil filter retrofit handy...Has anyone ever done this on a poly motor?...Where did you get it? And what type of spin-on filter does it require?
Thanks, Bob[/QUOTE]
hi mate ive been trying to change my oil filter but i was just wondering where is it located. please help. thanks a lot.

General BS and Laughs / Melbourne to Moscow in a 1913 Ford T
« on: April 15, 2012, 08:20:56 PM »
wow that was a great one. but out of curiosity i just wanna know if how could you've done great for the Ford brake calipers? thanks

Tech- - Engine / 65 Chrysler 413 Crankshaft Hey ED!
« on: March 05, 2012, 04:17:34 PM »
hi there apology for making this thread up.. i just wanna know if where can i get a crankshaft for my car? any response would be much appreciated. thanks!

Tech- - ELECTRICAL / Turn signals on the fenders
« on: March 02, 2012, 10:27:03 PM »

Quote from: 1965Windsor361
How the heck can you change the bulbs in the little lights on the fenders.. I want to get the signals up there working again.. but I can't see how to get them opne or even off on my 1965 Windsor...
try to buy some manuals. you get the right answer if you have them.. have the problem on fenders before so  bought some manuals and thats a big help

Tech- - FUEL / Another Fuel Pump Question...
« on: February 24, 2012, 08:14:34 PM »

Quote from: POLARACO

Also, you'll be changing the front hoses when you do the conversion, but everyone over looks the rear hose.  Hint Hint.  LOL  Looks can be deceiving
dude i just want to ask for a little help. can you send the procedure on how to remove a pump on my car? thanks a lot.

Tech- - Engine / Radiator Questions
« on: February 24, 2012, 12:42:19 AM »

Quote from: 67Newport
As part of my ongoing restoration I want to replace or recore my radiator. Is there any advantage to going with aluminum? Copper deteriorates after a while but aluminum doesn't. The cost is about the same for a new aluminum and a recore. If I go with the aluminum is there a cooling advantage to go with a 3 core instead of 2?
hi. having trouble with my radiator :( i want to replace it but im scared i dont know how to do it. hope you could help me.

General Tech / Still Make a Trailer Hitch for a 68 Fury Wagon?
« on: February 10, 2012, 08:30:24 PM »

Quote from:
Does anyone make a trailer hitches for a 68 Fury wagon?  A friend just bought a travel trailer, and now he needs a hitch. 
Will he have to find a vintage used one, or have one custom made?
which one did you choose? i have a vintage used one and im dont have any regret buying it.

Tech- -BODY / Vent handles
« on: February 06, 2012, 02:58:36 PM »

Quote from: rexus31
You will have to pull the cables from the vents, remove the nuts from behind the dash covers and pull them out from the front of the cover.

thanks for the tips. this thread really helps a lot. Even though it's old, it's nice to bring up occasionally, specially if it helps some people.

Tech- -BODY / Door Help
« on: January 30, 2012, 04:28:24 PM »

Quote from: BigMike
Last night John and I decided it was time to try to open my seized rear passenger door pin inserts[/color]....oh boy   After removing the door hinges and a little muscle later, she came off.  Boy was the mechanism dirty!  So we cleaned it and bolted it back on...then tried it out.  Things went good for the first two shuts but on the third one she seized back up   Apparently the star gear has a bad would I go about getting a new one?  68 Fury III Sedan 
is it okay to clean the door hinges even if its already installed? i just bought the hinges and the door pin inserts but the pin inserts not worked.

Tech- -BODY / 4 dr guy in a 2dr world door handle swap
« on: January 30, 2012, 02:26:16 PM »

Quote from: MoparMatt
Quote from: POLARACO
I didn't have that problem with the repros I got
Blame it on the rising price of Molson.  Lea had to cut a corner somewhere to maintain his "budget" status.  "BUUUUURP".....
Seriously, I only ever had to replace one door handles on a C.  I bought it from the Chrysler dealer as my used ones were just as sloppy and I didn't trust them.  I floored the partz guy when I simply gave him the OE part number to order the handle.  $15 and 24-hours later the LF door of my Polara was as good as new!  (aaand I didn't have to enter the car through the passenger door)  The same door handle fit a '92 Dodge truck!
hi there  just want to ask for a help of removing the door handles. and thanks for the tip on where to order one. :)

Tech- - Engine / New Valve Covers - PCV Valve?
« on: January 23, 2012, 03:17:48 PM »

Quote from: schaefman

can you post some pictures of it? and by the way where did you buy your valve? how much does it cost and how to install it? any help would be much appreciated.

Pages: [1] 2
© 2008-2014 Steve Hobby • © 2015 Allpar, LLC