MoparFins

Please login or register.

Login with username, password and session length
Advanced search  

News:

We changed servers, which is good, and lost all passwords, which is bad. See above.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Alan

Pages: 1 ... 3 4 [5] 6 7
61
General Tech / rear window defogger
« on: February 05, 2009, 05:02:37 PM »
Yes it's included. Its the one on ebay. $44 bucks is cheap money for being able to see out the back window.

62
General Tech / rear window defogger
« on: February 05, 2009, 06:09:07 AM »
I have a line on an NOS rear window defogger that was never installed. Its something I've wished for everyday this winter. It is the dealer install electric version, not the hot water factory install vesion. I think its complete but doesn't have an installation guide with it. This may have come out as a seperate service update. I know some of you guys have alot of the printed service information and I'm hoping someone might have this. It doesn't seem like a hard thing to install, but I would like to have a reference to make sure that I have everything and that I am making connections in the correct places. I searched Allpar, but didn't come with anything on it.
Thanks

63
Tech- - FUEL / Throttle cable
« on: January 25, 2009, 07:50:58 AM »
no spaces in the email address.

64
Tech- - ELECTRICAL / Bendix drives
« on: January 25, 2009, 07:28:55 AM »
Bendix it is then.

65
Tech- - ELECTRICAL / Bendix drives
« on: January 25, 2009, 04:14:45 AM »
It depends on how full your wallet is today. $10 for the bendix, $45 for a rebuilt, $145 for a new one.

66
Tech- - FUEL / Throttle cable
« on: January 25, 2009, 04:06:46 AM »

Thanks Lea,
 
Email me at                                     Let me know the cost and the shipping.

h aw g922@ verizon. net



edited for internet spam safety
stitcherbob2009-01-25 12:25:49

67
Tech- - FUEL / Throttle cable
« on: January 24, 2009, 02:11:42 PM »
My throttle cable sticks. The plastic covering that surrounds the steel cable and allows it to slide within the outer housing has shredded and causes it to bind. Has anyone found a good supplier for OEM type throttle cables? I don't want to go with Lokar. I did a web search, but the only one that had OEM cables was a place called Chucker 54 stores.  Never heard of em.

68
General BS and Laughs / Welcome to the Northeast.
« on: January 17, 2009, 03:58:42 AM »
I heat with a wood stove for most of the winter so the back rooms aren't quite as warm as the main rooms especially in this kind of weather. Its 73 in the living room. New windows, doors, and insulation made a big difference.

69
General BS and Laughs / Welcome to the Northeast.
« on: January 16, 2009, 04:57:21 PM »
Got home from work tonight and it was MOTS. Here's a pic of my thermometer at 2 degrees.  Think positive...only 13 more weeks till spring and I can lay on the ground under my car again.





 
 


70
General BS and Laughs / Welcome to the Northeast.
« on: January 16, 2009, 05:37:22 AM »
DUH!!! Clicked the wrong button thats why.



71
General BS and Laughs / Welcome to the Northeast.
« on: January 16, 2009, 05:27:15 AM »
ok, why is my pic only coming up as a link?

72
General BS and Laughs / Welcome to the Northeast.
« on: January 16, 2009, 05:20:30 AM »

Reminds me of the song, "my woodys outside all covered in snow". Yuk, definitely won't be changing the oil this weekend. 0 degrees when I got up this morning. Hey Stan, I know you miss this so I'm including a picture for ya so you don't forget your roots. I'll bet you're reading this in your Tee shirt and shorts.
 
 
uploads/143/ice.JPG

73
Tech- - FUEL / 2 bbl vrs 4 bbl
« on: January 15, 2009, 04:28:04 AM »
So I was talking with this guy last night about the less than stellar fuel economy that I get with my 2 bbl. He said I should switch to a 4 bbl because the primaries are smaller in the 4 bbl than the 2 bbl. It sounded plausible, but I don't see that there would be enough, if any, difference in the fuel economy to make it worthwhile going through the hassle of changing it. Plus, once I get my foot into it, I'd use more fuel than with a 2 bbl. Wanted to get some feedback before I go playing mythbusters. 

74
General BS and Laughs / Your first car....
« on: January 10, 2009, 01:08:03 PM »
My first in 1969 was a 57 Chev 2dr HT. Paid $400 for it. I have a pic, but its too dark to post . Ohhh if I had that car now it would be worth more than my plunging 401(k).
 
I did this with Stan a while back and came up with 30 something cars I've owned. The Port is my 1st Chrysler.  

75
Tech- -BODY / Patch panels
« on: December 30, 2008, 11:39:23 AM »
See Lea's pics above, that's what my fender looks like. For some reason I'm not able to post a pic.

Pages: 1 ... 3 4 [5] 6 7
© 2008-2014 Steve Hobby • © 2015 Allpar, LLC