MoparFins

Please login or register.

Login with username, password and session length
Advanced search  

News:

We changed servers, which is good, and lost all passwords, which is bad. See above.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Tim Kelly

Pages: 1 [2] 3
16
General BS and Laughs / PCC Cars
« on: February 16, 2009, 09:57:22 AM »
[/QUOTE]
 
These are still in operation in Dayton, Ohio, but newer models than the one pictured.

17
General BS and Laughs / help needed - shipping address
« on: February 14, 2009, 01:07:36 PM »
Hey Brak, long time no talk. Send me an IM. I remember getting parts from you from your 2 door Imp you parted out that I really needed. I'd be glad to help if possible.

18
General Tech / New Exhaust
« on: February 14, 2009, 01:02:39 PM »
I really lucked out today!  Located a nice set of the HP exhaust manifolds with  the heat riser parts still working from a good ole boy, and he was only 30 miles from me.
I have been convinced from the replies to this post to go with the Dynomax Super Turbo's with 2 1/2 pipes. I can't wait til the weather breaks, so I can get the 300 to the muffler shop.

19
General BS and Laughs / BLOCK YOUR DRIVERS LICENSE
« on: February 09, 2009, 09:23:24 AM »
I fell for it!! Hook, line and sinker!

20
General Tech / New Exhaust
« on: February 04, 2009, 02:35:52 PM »
After thought here...in addition to the new exhaust system, I thought this would be a good time to locate and add a set of HP exhaust manifolds. Will the HP's line up with the standard 440 exhaust manifolds or should I get the HP's first before spending the $$ on the exhaust?

21
General Mopar Discussions / Stumbled onto a new site
« on: January 23, 2009, 08:01:56 PM »
I was surfing for C Body parts and came across www.chryslerfanatic.com
This may be a newer website for our kind of cars trying to get off the ground. It's nice to see interest in the big bodied Chryslers growing. I added a pic of my car and a brief caption on my Imperial. 

22
General BS and Laughs / OMG! I'm gay!!
« on: January 17, 2009, 06:51:45 AM »
I know alot of folks who had or still have some of the cars on this list of gay cars....
Imperial...I owned it since 2005
Lincoln Town Car...father-in-law
Riviera...high school friend
Toronado....an old girl friend (lots of memories)
Eldorado...my uncle
Olds 98...I once had one of these many years ago (party car)
Fleetwood....same uncle who had the Eldo
NYB...I met a guy and his wife at a car show last year who had one
Seville...the priest who married me an my wife
Mark V...my brother-in-law had one
 
No one this list fits the mold of Cocoa Efficiant!
 
 
 
 

23
UPHOLSERY HOW TOO's / My dashboard is sticky!
« on: January 14, 2009, 11:46:05 AM »
Fury440, when I started to read your last post, I thought I was going to have to go Google Di-sec-Octylphthalate. Then I read you work for Meguiar's....that explains it!
They make a good product. I really like the tire dress-up stuff that comes in the aerosol can. It seems to last longer than other products. I'll give the 303 product and M40 a try. At least I now know these products are safe.



24
UPHOLSERY HOW TOO's / My dashboard is sticky!
« on: January 14, 2009, 03:21:23 AM »
As surprised as I am, I see this is a common problem. I havn't used any product except Forula 409...once. That didn't work, so instead of using some other type of product, I have only used warm water since. I would not use Armor All at all. That product does seem to dry up plastic/vinyl and also causes surfaces to discolor. AA won't get my endorsement.
I can't see paying out huge $ to replace a dash that is in decent shape, so I'll just continue to clean as I have done so far. Thx for the replys

25
UPHOLSERY HOW TOO's / My dashboard is sticky!
« on: January 12, 2009, 03:17:30 PM »
Sounds funny?...  
My dilema: There seems to be a sticky residue on the entire dash of my 300. I have never put anything on it to make this happen, but it's a pain to keep clean. In fact, it's just like a magnet to all the dandelion fuzzies that are floating around when I drivin with the top down. I have only used a damp cloth with warm water to wipe it off after driving. After it is cleaned and dries off, it's sticky again. What is a safe product to use without causing any damage?
My 300's dash might be a replacement from the original one. I'm not sure  if it is, but the fit seems to be slightly off, that is why suspect it's a replacement. Do replacement dashes have anytype of residue on them when new?

26
General Tech / New Exhaust
« on: January 08, 2009, 05:53:30 AM »
I'm having a difficult posting pic's to this site, but Polarco posted my Imp and 300 when I first joined Moparfins

27
General Tech / New Exhaust
« on: January 07, 2009, 06:02:19 PM »
Looks like the general concensus is Dynomax. I can honestly go with any brand as long as it can get me to the sound I'm trying to accomplish, and as long as my car doesn't sound like a Phord.  I have heard the Dynomax mufflers sound better the longer you have them on the car, which would be a good thing, since I plan on keeping this car a while.     My exhaust tips will be different than factory though. I plan on having the tips at a 45 degree angle, pointing down at the corners of the rear bumper. I did this on my Imp and it looks cool when it's warming up.
damn, I ramblin here....I was on the internet last night and came across some website, DXM, MDX, or something like that, (I should've save the site) but there was a complete dump kit for $179 for both sides, and there was even a couple video's on their site that showed the functionality of their product. It seemed to be quality stuff and not a bad price, but I can't find this site again. Anyone ever hear of this company or know their web address?

28
General Tech / New Exhaust
« on: January 06, 2009, 06:37:10 PM »
http://www.youtube.com/watch?v=wm91ZQ0CVe4


Hey Polarco, this is not what I want to happen once the exhaust is intalled.

29
General Tech / New Exhaust
« on: January 05, 2009, 06:21:18 PM »
Your car sounds good Cbarge. I think I'm going to have to go talk to my muffler guy this week, who also happens to be a Mopar guy, and get his opinion too.
He did a nice job on my Imperial back in 07.
Dynomax is certainly an option now. Thanks

30
General Tech / New Exhaust
« on: January 05, 2009, 06:07:07 PM »
Ya think the Ultra Flo SS mufflers would be too loud?

Pages: 1 [2] 3
© 2008-2014 Steve Hobby • © 2015 Allpar, LLC