MoparFins

Please login or register.

Login with username, password and session length
Advanced search  

News:

We changed servers, which is good, and lost all passwords, which is bad. See above.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - dana44

Pages: [1] 2 3 ... 35
1
Site Questions and Announcements / Re: You can use SSL now
« on: May 24, 2017, 12:41:20 PM »
Hey Dave,
I do appreciate all the work on saving all this information. Not many show up, but I do check daily to make sure people know we are still available for comment. Again, thanks.

2
Kind of a hard thing to know for sure, but, there are ways to verify the information by checking things out yourself. Take a stiff wire, like a coat hanger or slightly heavier and bend a loop in one end to attach to a wheel stud, then bend the wire to the inside of the rim so you have the wheel angle and tire height, the other end of the loop would be the outside outermost edge of the tire tread. Put this on the stud and you can turn the wheels left and right and rotate the hub to make sure you have clearance inside the wheel well and not hit.
With that, if the rims are new and could be returned for an offset instead of adding spacers, it will keep the tire and rim within the fender edge, which would be a concern. Stock rims were either 5 or six inches to begin with, one extra inch shouldn't be too much of an issue, 2 inches might be tight, but hope this method of checking the clearance helps.

3
WELCOME NEW MEMBERS! / Re: Old member,news on the Barge on a Budget
« on: April 11, 2017, 12:40:26 PM »
Well glad to see a few people on occasion stop by here to visit my daily check to see if others are showing up. Chris, any new pictures of your fantastic paint jobs? Always a pleasure to look at quality work.
Ed

4
WELCOME NEW MEMBERS! / Re: Old member,news on the Barge on a Budget
« on: April 06, 2017, 12:44:05 AM »
Yeah, sorry to say I don't get much response from you guys over here, but I do check every day just to make sure whoever posts gets some kind of response. I haven't gotten to do anything with my list of cars, but I do have a friend that has (gasp) Fords, as in Lightning trucks, and I just got done helping him build one as a clone, an F-150 with all the Lightning components (a two year buying spree of his), and since the engine had to be torn down because of a broken timing chain rail that bent 4 valves, I got to port the heads. Needless to say, of the four supercharged Lightnings he owns, the new one is the fastest one, by a LOT (hard to imagine with a blower, but it's all in the flow). Needless to say, glad to see someone visiting me here, yell at the guys and have them visit, too.

5
WELCOME NEW MEMBERS! / Re: Old member,news on the Barge on a Budget
« on: March 28, 2017, 01:08:37 PM »
Yeah, well, they ain't Mopars, but "old" is good, so I can live with it. What's on the agenda for these two? I would think a nice 383 under the hood of a '58 Olds would make her scoot pretty good, and Buicks, although a little new, do have a comfortable ride, so good for you, and thanks for showing up, love the company!

6
WELCOME NEW MEMBERS! / Re: Another recycled member!
« on: March 28, 2017, 01:05:24 PM »
Yes, it would be nice to see more visitors and members show up. This is the first time since the site was saved that I have seen two posts in one day, so thanks for stopping by and giving extra words of encouragement!

7
WELCOME NEW MEMBERS! / Re: Another recycled member!
« on: March 07, 2017, 02:53:14 PM »
I check daily to see if anyone has anything to say or show, let them know they aren't alone. Keep up the charge, we are still around.

8
WELCOME NEW MEMBERS! / Re: Another recycled member!
« on: February 11, 2017, 01:01:48 PM »
Nice. Yeah, cars from Arizona and Southern California are the best. My 95 Dakota has no rust issues at all, not even any surface rust. No crusty bolts underneath, no snapped bolts, hell, even have the original paint on the floorboards still, can't beat the metal quality to start with. a 451 stroker, huh? Nice. Well, welcome back, hope we can get more people visiting, catch up the last couple years actually.

9
WELCOME NEW MEMBERS! / Re: Another recycled member!
« on: February 10, 2017, 01:28:45 PM »
Beautiful car, glad you could share with us. Always loved those big blocks and low rpm highway cruising speeds, and gotta love it more with the top down. Welcome back, keep posting.

10
WELCOME NEW MEMBERS! / Re: Old member,news on the Barge on a Budget
« on: February 09, 2017, 01:11:08 PM »
Well, get us some pictures. I check here daily just to see if anyone still shows up, lots of info here so hope people are at least looking after Dave was so kind as to keep the site alive. I get an entry about once every two to three weeks, so kind of slow, but hope to see and read about the C Barge.
Ed

11
WELCOME NEW MEMBERS! / Re: Old member,news on the Barge on a Budget
« on: January 23, 2017, 11:51:06 AM »
Well, welcome back, things are pretty quiet here, hope more people come back. Will be nice to see pictures on your updates when she gets back from paint, been a long time working on this one.
Cheers!

12
WELCOME NEW MEMBERS! / Re: Newbie from Cincy/Northern KY
« on: January 08, 2017, 01:04:39 PM »
Hi Chris, welcome to the forum. Kind of quiet around here, this site is now run by Allpar.com. You may want to also join there for free, a lot more guys are familiar with this kind of stuff over there, with a much larger audience. There is a lot of good information and projects on here, that's for sure, and to add to the collection and see if anyone is interested or knows more about selling prices for such, you can post pictures to see what you have and the condition.

13
Site Questions and Announcements / Re: You can use SSL now
« on: December 31, 2016, 12:46:50 AM »
Thanks Dave,
And thanks for keeping the information here. Not many postings since moving, but there is still some good information here, and some fun projects.
Happy New Year, and hope you had a Merry Christmas.
Ed

14
Site Questions and Announcements / Re: I have updated the forum software
« on: November 04, 2016, 01:47:17 PM »
Those are some awesome pictures. My dad had a 37 Cadillac 4door V8 when I was a young teen, nice car. Yours is beautiful. Thanks for sharing both cars.

15
Site Questions and Announcements / Re: I have updated the forum software
« on: October 30, 2016, 07:58:02 PM »
Awesome, Dave, and super thanks from all the guys.
OK, post away!!!

Pages: [1] 2 3 ... 35
© 2008-2014 Steve Hobby • © 2015 Allpar, LLC