MoparFins

Techical Discussions => Tech- - DRIVE TRAIN => Topic started by: Brian on August 01, 2009, 02:06:07 PM

Title: Rearend problems...part II
Post by: Brian on August 01, 2009, 02:06:07 PM
Thanks again guys.
Title: Rearend problems...part II
Post by: Steve on August 01, 2009, 02:56:27 PM
You're not dragging a brake are you?
Title: Rearend problems...part II
Post by: Brian on August 01, 2009, 04:21:29 PM
Well due to the excessive temps from before the drums are more then likely warpped.  I reset the rear drums and shoes before I left to make sure there was no dragging. 


 
I think I'll get a set of new drums and shoes adn go from there.
 
I also want to get a new solid drive shaft made up, since the orignal is the two piece unit with the rubber filled tail section....who knows what condition that rubber is in after 40+ years and that could be the cause of premature U-joint failure as well.