MoparFins

Techical Discussions => Tech- - Engine => Topic started by: AJ on April 23, 2009, 03:57:45 AM

Title: AMC 360 Camshaft Specs
Post by: AJ on April 23, 2009, 03:57:45 AM
Calling AMC Nuts! (http://www.moparfins.com/forum/smileys/smiley4.gif)
 
I cannot seem to find anything online that has what the cam specs are for an 85 AMC 360.  When I did find information on it - it does not tell me what the lift @ .50 is etc so I cannot run a computer simulation to estimate my Tq\\HP...from the specs that I did find and 'guesstimating' the missing info I have ~340ft\\lbs and ~260hp by using the following components:
 
Eddy 600 Performer Carb
Eddy Dual Plane Intake (No EGR)
Stock Heads
Stock Manifolds (Dog Leg Heads)
Custom 2.25 -> 2.5 2-1 Mandrel
Thrush Chambered Welded
HEI Ignition(50K V)
Double Roller Chain
NO Emissions (AIR Ports plugged\\Smog Pump Removed\\No Cat\\No EGR)
Elec Fan
 
She runs good and plants you in the seat pretty good when you step on it even with 3.31 gears and 35x12.50 tires...lots o traction but can still brake stand w/o much effort at all (don't beat on it on the street really - just offroad).  The whole thing is that I really want to know what the curves are because I want to optimally re gear my rig...I have to do it because the D44 I am swapping in is a different ratio...I want to do it once, though.
 
Anyway - any help would be appreciated.
 
evulution2009-04-23 08:57:59
Title: AMC 360 Camshaft Specs
Post by: Snotty on April 24, 2009, 09:25:02 AM
Tough question.  Although I don't want to lead you away, I would send it to Davis Martin on GremlinX.com.
 
 
Title: AMC 360 Camshaft Specs
Post by: AJ on April 24, 2009, 06:46:38 PM
I guess only you and I are AMC guys on here, eh, Snotty!  (http://www.moparfins.com/forum/smileys/smiley29.gif)






 
Thanks for the lead...
Title: AMC 360 Camshaft Specs
Post by: Snotty on April 27, 2009, 11:25:16 AM
No, there is Ron as well, but that labels all 3 of us!!  :-)
Title: AMC 360 Camshaft Specs
Post by: AJ on April 27, 2009, 11:28:30 AM
That kinda sucks, doesn't it...AMC was well ahead of its time with a lot of what they did. :(

 
O well...