MoparFins

Techical Discussions => Tech- -BODY => Topic started by: Dan Cluley on February 19, 2009, 01:53:22 AM

Title: Weatherstrip for Dart Sedan Windows
Post by: Dan Cluley on February 19, 2009, 01:53:22 AM
Any sources for replacements?
 
Thanks,
D Cluley2009-02-19 06:54:06
Title: Weatherstrip for Dart Sedan Windows
Post by: Stitcherbob on February 19, 2009, 04:50:35 AM

Try this site Dan

http://www.metrommp.com/ (http://www.metrommp.com/)

(http://www.metrommp.com/mainne2new..jpg)




Title: Weatherstrip for Dart Sedan Windows
Post by: Leaburn Patey on February 19, 2009, 05:01:42 AM
(http://www.restorationspecialties.com/topcat.JPG)
http://www.restorationspecialties.com/beltws.htm (http://www.restorationspecialties.com/beltws.htm)
These guys cater to the four door crowd.
They do have listings for your A body 4 door-just scroll down in the link I posted.
I am very happy with them and pleased with the product I bought from them for the BoaB
CBarge2009-02-19 10:03:18
Title: Weatherstrip for Dart Sedan Windows
Post by: Dan Cluley on February 26, 2009, 09:04:37 PM
I'm seeing two different products from restoration specialties.
AS990029 - rubber door channel  - this is shown elsewhere to be 27/64" wide and is listed for 66-75 A body, 66-67 B body and 67-70 C body
 
6772SED4 - glass run channel kit - listed as 67-72 4 door A body.
 
I'm not sure what the difference would be between 67-72 and the later cars?
The 27/64" may be for the division bar between vent glass and the roll down window, but is way too narrow for the top and rear pieces.
 
Could sombody with a C sedan or wagon  compare theirs to mine?
 
Yes, I probably just need to contact restoration specialties, but I'm really just researching at this point, and not realy ready to spend any money.
 
(http://www.moparfins.com/forum/attachments/22/dart_division_channel.JPG)
 
 
(http://www.moparfins.com/forum/attachments/22/dart_rear_channel.JPG)