MoparFins

Techical Discussions => Tech- - STEERING WHEELS AND SUSPENSION => Topic started by: Rob Roche on April 24, 2008, 10:19:38 AM

Title: Pre-C PS cooler?
Post by: Rob Roche on April 24, 2008, 10:19:38 AM
Hey Gang

I started prepping the '64 New Yorker for engine removal yesterday (okay...all I did was move it up on the concrete pad in front of the garage...but hey! it's a start (http://www.moparfins.com/forum/smileys/smiley36.gif) )

Found this in front of the A/C condenser

(http://pic70.picturetrail.com/VOL1789/7783792/18326899/314591791.jpg)

I thought, "no, can't be" but I followed the hoses right to the box and pump.

So, is this a factory power steering cooler? or aftermarket. I still plan on putting it in the '64 300 along with the 413 (and probably the A/C w/ Bouchelon compressor conversion depending on how ambitious I get)





Title: Pre-C PS cooler?
Post by: Steve on April 24, 2008, 12:38:04 PM
I just saw my 65 for the first time. . .It has one too.
 
I don't remember one in my 66 Newport, but that was 30 some years ago.  I was just a "Damned Kid" then. (http://www.moparfins.com/forum/smileys/smiley36.gif)
Title: Pre-C PS cooler?
Post by: Snotty on April 25, 2008, 09:32:34 PM
My Dad's '65 Newport with 383HP had one, but it was not that big nor located in front like that.  It was mounted next to the PS pump.  I have never seen one like this picture.
Title: Pre-C PS cooler?
Post by: Dan Cluley on April 26, 2008, 01:43:31 AM
I took this one off a '65 New Yorker.  Looks like the same part.
 
(http://www.moparfins.com/forum/attachments/22/ps_cooler.JPG)