MoparFins

Please login or register.

Login with username, password and session length
Advanced search  

News:

We changed servers, which is good, and lost all passwords, which is bad. See above.

Pages: [1]   Go Down

Author Topic: Steering Column Gasket  (Read 349 times)

Andy

  • Guest
Steering Column Gasket
« on: February 22, 2010, 09:26:22 AM »

Is there somewhere I can get a new gasket for the base of the steering column, where it goes through the firewall, for my 64 300? I noticed I could see daylight through it the other day while I was under the dash trying to, desperately, figure out some of the wiring!
 
Is it just a one piece part that attaches from the inside or is there another piece that goes into the engine compartment?
 
I'm just so darned confused! I feel like I'm trying to put a 10,000 piece jigsaw puzzle back together, without a picture!    
Logged

Steve

  • Administrator
  • Hero Member
  • *****
  • Karma: +1/-0
  • Posts: 8653
    • View Profile
Steering Column Gasket
« Reply #1 on: February 22, 2010, 11:16:54 AM »

Are you talking about the one that goes behind the plate or the one around the column?
Logged
Favorite Expression. . . Damned Kids.  Lots of projects.  Donations accepted

steve sclafani

  • Sr. Member
  • ****
  • Karma: +0/-0
  • Posts: 334
    • View Profile
Steering Column Gasket
« Reply #2 on: February 22, 2010, 03:38:03 PM »

I got one from Andy Burnbaum. Gary Goers also has them.
Logged

Andy

  • Guest
Steering Column Gasket
« Reply #3 on: February 22, 2010, 05:05:38 PM »

If there are 2 of them I'm sure both need to be replaced. The one I was looking at, while under the dash, was the one around the column where it goes through the fire wall and out to the engine comppartment.
Logged

Andy

  • Guest
Steering Column Gasket
« Reply #4 on: February 22, 2010, 05:08:32 PM »

Quote from: FIN_NV
I got one from Andy Burnbaum. Gary Goers also has them.
 
I always forget about Goers! He's got lots of rubber stuff for the 64. Thanks for reminding me.
Logged
Pages: [1]   Go Up
 

© 2008-2014 Steve Hobby • © 2015 Allpar, LLC