MoparFins

Please login or register.

Login with username, password and session length
Advanced search  

News:

We changed servers, which is good, and lost all passwords, which is bad. See above.

Pages: [1]   Go Down

Author Topic: P.S. Pump Identification  (Read 675 times)

Stan Paralikis

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 114897
    • View Profile
P.S. Pump Identification
« on: December 05, 2009, 09:44:10 AM »

There were four (!!!)  PS Pumps for my car in 1976 .
Early 440 w/o A.I.R.
Early 440    w/A.I.R.
Late  440 w/o A.I.R.
Late  440    w/A.I.R
 
I have the Early 440 w/o A.I.R.  P/N 2891463
 
AZ and Advance list the following rebuild kits for my "make, model, year  ).
 
Te problem is, depending if I compare pictures of pumps from Rock Auto, Advance, and AutoZone, they give conflicting descriptions of which is which.  Is the EGG shaped resevoir or the ROUND resevoir the Saginaw?  My resevoir is round.
 
Looking at the pics of my pump and the kits I listed,  which kit do I want?
(or in other words, do I have the Saginaw or Chrysler (Federal) pump?)
 

 

 

 

 

 
Commando12009-12-05 15:01:50

Ken

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 898
    • View Profile
P.S. Pump Identification
« Reply #1 on: December 05, 2009, 09:50:38 AM »

You have a Federal pump there, note the round filler neck and cap with ears.

Logged
'67 300 2 door "Fast top" with factory A/C, 1973 disc power brakes,Firm Feel Stage 1 power steering, Auto-pilot, up for sale!

Ken

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 898
    • View Profile
P.S. Pump Identification
« Reply #2 on: December 05, 2009, 09:51:22 AM »

Which would mean you DON'T have a Saginaw unit.

Logged
'67 300 2 door "Fast top" with factory A/C, 1973 disc power brakes,Firm Feel Stage 1 power steering, Auto-pilot, up for sale!

Stan Paralikis

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 114897
    • View Profile
P.S. Pump Identification
« Reply #3 on: December 05, 2009, 10:28:52 AM »

SONAVAGUN!  It sho looks like this one:
 
Slant 6 PS Pump
 
You think it's the same???  25 bucks!

Alan

  • Full Member
  • ***
  • Karma: +0/-0
  • Posts: 123
    • View Profile
P.S. Pump Identification
« Reply #4 on: December 05, 2009, 01:03:15 PM »

Does your's have a threaded shaft? My 67 didn't and you had to disassemble the pump to press on the pulley. Just buy a rebuilt one from AZ. The shaft gets threaded when they rebuild them.  PN #6157 looks like yours. Its cheap money and has a lifetime warrantee. Of course if your trading in the NYer for a Valiant, I wouldn't worry about the warrantee. 67Newport2009-12-05 18:04:30
Logged
Al

Stan Paralikis

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 114897
    • View Profile
P.S. Pump Identification
« Reply #5 on: December 05, 2009, 03:13:13 PM »

It's nice to have a friend in the business.  You just have to take the BS that comes with it....
Al, you understand these things.  Explain to these nitwits why a 440 should go into a 2 dr. post Valiant.Commando12009-12-05 20:23:11

Steve

  • Administrator
  • Hero Member
  • *****
  • Karma: +1/-0
  • Posts: 8653
    • View Profile
P.S. Pump Identification
« Reply #6 on: December 05, 2009, 03:30:17 PM »

That's a federal you have.  When Raymond was looking that up he said so.

They ar eall the same basic pump.  The difference is the pully diameter and depth.  If I remember right, the one with A.I.R. had a dual pully.  It will work.



 
It's all coming back to me now
Logged
Favorite Expression. . . Damned Kids.  Lots of projects.  Donations accepted

Alan

  • Full Member
  • ***
  • Karma: +0/-0
  • Posts: 123
    • View Profile
P.S. Pump Identification
« Reply #7 on: December 05, 2009, 03:55:45 PM »

There is a difference in pully diameter. My 383 has a smaller pulley. 
67Newport2009-12-05 20:57:11
Logged
Al

Steve

  • Administrator
  • Hero Member
  • *****
  • Karma: +1/-0
  • Posts: 8653
    • View Profile
P.S. Pump Identification
« Reply #8 on: December 05, 2009, 04:05:45 PM »

He's polish. . .It takes him a while.  I'd like to see him get the car though
Logged
Favorite Expression. . . Damned Kids.  Lots of projects.  Donations accepted

Stan Paralikis

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 114897
    • View Profile
P.S. Pump Identification
« Reply #9 on: December 06, 2009, 03:40:27 AM »

At Mopar shows, I see plenty of big block A-bodies. 
In fact, you can cram just about anything into them:
 

 

Butch Houghton

  • Full Member
  • ***
  • Karma: +0/-0
  • Posts: 210
    • View Profile
P.S. Pump Identification
« Reply #10 on: December 06, 2009, 09:11:12 AM »

Stan,  not sure you're aware of this but the 63-66 A-body's are about 2" narrower in the front between the frame rails than the 67-up A-body's. 

That's why you don't see many big block early cars.   A lot of work.    Smartest thing would be an AlterKtion front end,  lotsa room that way.   Shumacher does make conversion mounts & I wouldn't be surprised if their Tri-Y headers might fit but you'd have to check with them.

Go read over at Big Block Dart for info.....

http://www.bigblockdart.com/

Butch


Logged
68 Dart GT - 394 Stroker/6 Pack
70 Fury Gran Coupe - 472 Hemi
70 Sport Fury - 383 Magnum FK5

firedome

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 3644
    • View Profile
P.S. Pump Identification
« Reply #11 on: December 06, 2009, 10:18:30 AM »

IIRC, didn't the factory make a very few Hemi Darts in the 68/69 period? 

Logged
Fuselage C-Body Power!!!

Stan Paralikis

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 114897
    • View Profile
P.S. Pump Identification
« Reply #12 on: December 06, 2009, 11:36:35 AM »

Yep!.  Got to see and touch one in person in 68.  It was D ick Landy's
Been wantin one ever since...........

Stan Paralikis

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 114897
    • View Profile
P.S. Pump Identification
« Reply #13 on: December 06, 2009, 02:49:05 PM »

Quote from: Moesy
You have a Federal pump there, note the round filler neck and cap with ears.

Moe:
So, how much is my cap worth then
 
POWER STEERING PUMP CAP
Pages: [1]   Go Up
 

© 2008-2014 Steve Hobby • © 2015 Allpar, LLC