MoparFins

Please login or register.

Login with username, password and session length
Advanced search  

News:

We changed servers, which is good, and lost all passwords, which is bad. See above.

Pages: [1]   Go Down

Author Topic: Rear Seat Belt Mounting Locations - 1965 Chrysler  (Read 495 times)

Scott

  • Sr. Member
  • ****
  • Karma: +0/-0
  • Posts: 281
    • View Profile
Rear Seat Belt Mounting Locations - 1965 Chrysler
« on: November 20, 2009, 02:49:26 PM »

I was wondering if anyone could help me out.  I've got a '65 300 'vert which did not come with rear belts but I was wanting to add them.  I've got a set of factory belts and hardware but I'm not sure where to drill.  There is a set of two round dimples on the passenger's side and driver's side floor board just below the seat beack.  There is also a single dimple on the inner fender well on both the passenger's and driver's side.  Which dimples do I drill out for the mounting hardware?  If would be great if someone had pics.
Logged
============================================================
"What ain't no country I ever heard of. They speak English in What?" - Jules Winnfield

Stitcherbob

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 13606
    • View Profile
Rear Seat Belt Mounting Locations - 1965 Chrysler
« Reply #1 on: November 20, 2009, 04:11:09 PM »


here's the FSM on the 66.....which has an identical floorpan




Logged
They treat me like dirt! I'm better than dirt! Well better than most kinds of dirt. Maybe not as good as store-bought dirt.Thats got nutrients & stuff

300rag

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 687
    • View Profile
Rear Seat Belt Mounting Locations - 1965 Chrysler
« Reply #2 on: November 20, 2009, 04:32:31 PM »

E-mail sent





 

 
 

 
 
 
 

 
 
 
300Rag2009-11-20 23:12:43
Logged
1965 Chrysler 300 convertible 413/ 4 speed ; 1969 Monaco 3-seat wagon 383/727 ; 1969 Monaco 500 2-door 318/727

Snotty

  • Hero Member
  • *****
  • Karma: +0/-0
  • Posts: 3972
    • View Profile
Rear Seat Belt Mounting Locations - 1965 Chrysler
« Reply #3 on: November 22, 2009, 04:46:05 PM »

I pout front seat belts in the '62 New Yorker I once owned.  The mounting holes were pre-drilled and threaded.  All I needed to do was remove the rubber plugs adn find out what size and thread type mthe holes were. 
 
I would imagine the '65 would have these same holes.  If so, they will be filled with rubber body plugs.  Don't drill until you know for sure.
Logged
It's green here in Chico!!
Pages: [1]   Go Up
 

© 2008-2014 Steve Hobby • © 2015 Allpar, LLC